Rocker
Medium entry with a continuous curve and measured tail rocker for pace and predictable transitions.
1 / 5
Shortboard / 2–6ft
Fireball
Your daily driver with teeth. Fireball switches on when the bank's average and stays composed when it pulses. Easy speed on entry, sharp when you ask for it.
- Fin setup
- Thruster / FCS II
- Construction
- PU and polyester / sanded finish
From $1,130 AUDSize guide
Made to order
Each board is made to order based on the options you chose. Because of that, we cannot make changes or cancellations once an order has been placed. All sales are final. If something arrives damaged or with a craftsmanship issue, please reach out to us at [email protected] and we will make it right. Made-to-order boards are covered under our standard warranty and the same level of care we put into every board we build.
Fireball built
Built for responsive drive & everyday waves
Your daily driver with teeth. Fireball switches on when the bank's average and stays composed when it pulses. Easy speed on entry, sharp when you ask for it.
Who it's for: Intermediate to advanced surfers who want real performance without the punishment. Snappy when cued, forgiving when the sections go flat.
Waves and feel: 2-6ft beachies and points. Quick paddle, early entry, stable underfoot. Draws fast, uncomplicated lines and snaps clean without bog.
Why it feels
that way.
Every curve has a job. Together they give the Fireball easy entry, dependable speed and enough control to push when the wave stands up.
Bottom
Single through the centre to a slight double between the fins for lift and clean release.
Rails
Modern medium rails, fuller up front for forgiveness and tapered to bite through the fins.
Outline
Fuller nose for paddle power, a parallel mid for carry and a subtle hip for pivot.
Tail
Squash tail for control, projection and easy release through the end of the turn.
Easier take off
Fuller nose and lower entry help the board paddle and enter early.
Control when pushed
Medium rails and measured tail rocker hold when the section has power.
Built for
Everyday surf progress.
Choose the right board for your goal.
The Fireball balances responsive drive with everyday ease. These nearby models move the decision in a different direction.
Small-wave drive
Wabi
More response and spark when the surf is small.From $1,210 AUD
Sharp and pivotal
IKi
More immediate direction change and a tighter performance feel.From $1,130 AUD
Glide and flow
Buri
More effortless speed with a lively quad feel.From $1,330 AUDDimensions
Size guide.
Ride it around your height and match the volume to your usual shortboard. The rider-weight guide is a starting point.
| Length | Width | Thickness | Volume | Rider weight | Price |
|---|---|---|---|---|---|
| 18 1/4" | 2 5/16" | 25.55L | 67 kg | $1,130 | |
| 18 1/2" | 2 3/8" | 26.58L | 70 kg | $1,130 | |
| 18 1/2" | 2 5/16" | 26.29L | 69 kg | $1,130 | |
| 18 3/4" | 2 3/8" | 27.34L | 72 kg | $1,130 | |
| 18 1/2" | 2 7/16" | 28.07L | 74 kg | $1,130 | |
| 18 3/4" | 2 1/2" | 28.73L | 76 kg | $1,130 | |
| 19" | 2 3/8" | 28.52L | 75 kg | $1,130 | |
| 19 1/4" | 2 7/16" | 29.63L | 78 kg | $1,130 | |
| 19 1/2" | 2 7/16" | 30.46L | 80 kg | $1,130 | |
| 19 1/2" | 2 1/2" | 31.21L | 82 kg | $1,130 | |
| 19 1/2" | 2 1/2" | 31.66L | 83 kg | $1,130 | |
| 19 1/2" | 2 9/16" | 32.43L | 85 kg | $1,130 | |
| 19 3/4" | 2 9/16" | 33.31L | 88 kg | $1,130 | |
| 19 3/4" | 2 5/8" | 34.09L | 90 kg | $1,130 | |
| 19 3/4" | 2 5/8" | 34.57L | 91 kg | $1,130 | |
| 20" | 2 5/8" | 35.01L | 92 kg | $1,130 | |
| 20" | 2 11/16" | 36.31L | 96 kg | $1,130 | |
| 20 1/4" | 2 11/16" | 36.76L | 97 kg | $1,130 |
Suggested rider weight uses a 0.38 Guild Factor for an average intermediate shortboard surfer. Volume divided by rider weight equals 0.38.
A clear order. A clear build.
- 01
Choose
Select the Fireball size that suits you.
- 02
Order
Check the made-to-order terms and complete checkout.
- 03
Follow
See the board in My Quiver and receive build updates by email.
- 04
Receive
Collection or delivery is arranged when the board is ready.
Useful
answers.
The details that matter before you place a made-to-order board.
Can I order this model without a Design Session?
Yes. Choose one of the listed dimensions and order it directly from this page. Use a Design Session only when you want to change the specification or add decorations, change colour, or make another custom change.
What makes a Yugen board different?
Every Yugen model is designed for a clear purpose: to help a surfer create a specific feeling or make progress toward a specific goal. The range combines surfboard design knowledge with practical experience in surfing skills development.
What materials are used in the standard build?
We use premium polyurethane foam blanks, E-GLASS fiberglass and polyester resin for all our boards.
How durable is a Yugen fiberglass board?
We focus on careful craftsmanship and select premium materials for the intended build. Like any fiberglass surfboard, its life also depends on how it is surfed, transported and stored. Direct impacts, excessive heat and water entering an unrepaired ding can shorten its life. You will receive specific care instructions when you place your order.
How are Yugen boards shaped?
Each board begins with its 3D design and is precision CNC cut, then finished by hand. We believe that precision at the time of manufacturing ensures the board behaves the way it was intended and keeps consistency high.
Can I change or cancel a made-to-order board?
Each board is made to order based on the options you chose. Because of that, we cannot make changes or cancellations once an order has been placed. All sales are final. If something arrives damaged or with a craftsmanship issue, please reach out to us at [email protected] and we will make it right. Made-to-order boards are covered under our standard warranty and the same level of care we put into every board we build.
How long does the board take?
The current build estimate is about six weeks. The ready date shown on this page updates when you order.
How are boards shipped?
Do you ship internationally?
What if there is a manufacturing problem?
Need anything changed?
Dimensions, volume, construction, fins or finish are worked through in a Design Session.